APPLICATION
Apply to clean, dry lips.  Shake tube horizontally prior to application. LipSense® is applied by using a layering technique. ​​(Optional to use LinerSense® Lip Liner for a more defined, finished look before applying LipSense®.)

Step 1: Wipe excess liquid off wand. Begin application at the corner of mouth, (usually) using the longest length of the applicator. Keep lips apart, and follow the natural shape of lips starting at the outer corner of the mouth. With one continual stroke, apply one layer of color from one corner to the other corner of the bottom lip, then one layer of color to the top lip. Apply the color, moving the applicator in one continuous direction versus going back and forth like you would with lipstick. 

Step 2: Repeat Step 1 two more times, so that you have a total of 3 layers of LipSense® applied to your lips. Let each layer set for a few seconds before proceeding to the next, and do not press lips together. It is not recommended to apply more than three layers of color. 

Step 3: After third layer, apply LipSense® Moisturizing Gloss and press your lips together to smooth in the moisture rich gloss!
​
REMOVAL
Use Ooops!™ Color Remover or liquid Fooops!® SenseCosmetics® Color Remover.  Apply Remover and wait 30-60 seconds. Gently wipe clean with a tissue or cloth. Repeat as needed.
                        TIPS & TRICKS
  • A slight tingling may occur if lips are dry or dehydrated. This stops when gloss is applied, and will go away completely as lips hydrate with consistent use of LipSense.
  • Reapply gloss often for longer lasting color, especially before and after meals.
  • Don't leave in hot cars... as LipSense is sensitive to extreme cold or heat, 
  • Achieve 27 different looks with only 3 LipSense colors by creatively layering them like this example: 27_shades_from_3_colors.jpg

​